| Login
Dehumidifiers


How can a Dehumidifier help me?
The major problem in indoor pools is an excess of humidity and condensation from evaporation of the pool surface. This leads to an unpleasant environment for swimmers and expensive damage to the building and it's contents.

Dehumidifiers remove excess moisture from the air, thus allowing a swimmers body to feel comfortable when entering or leaving the water. Humidity control also prevents high vapour pressure from penetrating walls and ceilings to the detriment of both decoration and structure. Since humidity is latent energy available for recycling, energy savings are huge. Recovery of this energy to air and to water can lead to systems paying for themselves in less than 2 years, and thereafter maintaining low pool running costs.


How does it work?



Indoor Pools:

The Heat Pump Dehumidifier recirculates the pool hall air, removing excess moisture an reclaiming its stored heat. This heat is added to the driving energy of the machine so that ALL the energy can be channeled back into warming the pool water and air. On relevant models an amount of fresh air is automatically added to maintain air quality.

Outdoor Pools:
Heat Pumps for outdoor pools extract free energy from outside air over a variety of temperatures from -15°C to +40°C. This energy is harnessed by the heat pump for water heating units incorporating suitable heat exchangers. Since only a small amount of electrical energy is required, heating output can be up to 5 times electrical input - 500% efficiency. No boiler or heater can exceed 100%.

 

Calorex DH75 / 110 Technical Specifications

 

Technical Specifications

DH75 DH110
Water Removal @ 30°C / 60% RH (l/hr) 3.6 4.5
Water Removal @ 30°C / 70% RH (l/hr) 4.6 5.4
Air Flow (m3/hr) 1180 1180
Power Absorbed (kW) 1.46 2.1
Nominal amps (A) 6.4 9.3
Power Supply 230V 1ph 50Hz 230V 7ph 50Hz / 400V 3ph 50Hz
Heat recovered (kW) 4.0 5.2
LPHW battery (kW)
(water at 80°C) optional
8.9 8.9
Condensate pipe o/d (mm) 22 22
Temperature Operating Range (°C) 5 - 40 5 - 35
 

Dimensions (mm) Std Model (Unpacked)

Width 1437 1437
Depth 325 325
Height 792 792
Weight (kg) 132 134


Calorex 33 / 55 Technical Specifications

 

Technical Specifications

33 55
System Fully Hermetic refrigeration system charged with Refrigerant 22. THe evaporator and condensor coils are refrigeration
Control Adjustable humidistat: range 20% - 80% R.H.
Air Flow m3/hr 440 740
     
Electrical    
Supply 230V 50Hz 230V 50Hz
Fuse 10 amp 30 amp
Nominal Running 3.4A 5.6A
 

Dimensions (mm) Std Model (Unpacked)

Width 653 653
Depth 255 255
Height 780 1245
Weight (kg) 37 58
 
Hot Gas Defrost Models - Performance
Temperature 5°C
R.H. 75%
9 Litres / 24h 18 Litres / 24h
Temperature 0 °C
R.H. 80%
5 Litres / 24h 10 Litres / 24h


Copyright 2008 Prime Heating Group